2. Installation and wiring
2.1 Installation environment
Panel mounted, indoor Process Control Equipment; Pollution degree 2, Installation Category II
In order to enhance the product's credibility and give full scope to IPC5000 functions, do not install
the product in the following places.
Place where temperature exceed
50°C(122°F)
Place exposed to direct sunlight
Outdoors
Places with a sub-zero temperature
(below 0℃)
Places with humidity of over 85%
Places with abrupt temperature changes that
cause dewdrops
Place exposed to water, oil or chemical substances
Warning
Places exposed to corrosive or flammable
gases
Place with dust, salinity, iron powder and other
conductible substandes and organic solvents
Places susceptible to vibration and shock
Places exposed to strong electronmagnetic fields
- 2 -