Initialize Screen; Fig. 3.21.1 Initial Screen; Fig. 3.21.2 Confirm For Initializing - Honeywell IPC5000 Installation Manual

3.21 INITIALIZE screen

Initializes program data and display program version of IPC5000
EXIT
(1)
(2)
(3)
SYS SET
If the a certain button is pressed, the message box is shown as followings,
EXIT
SYS SET
If the Yes button is pressed, initializes the data as followings.
(1) PROGRAM DATA CLEAR
Initializes all PROGRAM DATA to initial value.
SSP1/2, TSP1/2, TIME, JC, SIG SET = 0, Start mode = SSP, PID group number.
(2) PID PARAMETERS CLEAR
Initializes all data related to PID parameter of Channel 1 and 2.
Each PID parameter will be initialized like below Table 3.21.1
INITIALIZE
PROGRAM DATA CLEAR
PID PARAMETERS CLEAR
THE LAST DATA CLEAR
Version : 1.0
NET SET TROUBLE

Fig. 3.21.1 INITIAL screen

INITIALIZE
PROGRAM DATA CLEAR
Are you sure ?
PID PARAMETERS CLEAR
Yes No
THE REST DATA CLEAR
Version : 1.0
NET SET TROUBLE

Fig. 3.21.2 Confirm for initializing

01.23.MON
12.59.01
FM_ver: 1.0
INITIAL
01.23.MON
12.59.01
FM_ver: 1.0
INITIAL
- 80 -
WARNING
Before initializing,
data to be clear, which you
already have set, because
you will be lost them.
record