Table of Contents
Advertisement
ITEM
FIX
DOWN
UP
(4) ASSIGN channel display : It is available for IPC5000D.
CH1 : Operates OFF/ON according to the mode of Channel(Loop) 1.
CH2 : Operates OFF/ON according to the mode of Channel(Loop) 2.
BOTH : Operates OFF/ON according to OR or AND status of both channel selected by the
selector(5).
(5) CONDITION button : It is available for IPC5000D.
In item (5), displayed when 'BOTH' button is selected. Pressing the button will reverse
its display.
OR : Channel 1 and 2 operation is ON/OFF according to OR Condition.
(Example) If Mode of Mode event for a Digital output is "TUNE", the Digital output
Channel 1
RUN(0)
TUNE(1)
HOLD(0)
TUNE(1)
AND : Channel 1 and 2 operation is ON/OFF according to AND Condition.
(Example) If Mode of Mode event for a Digital output is "TUNE", the Digital output
Channel 1
RUN(0)
TUNE(1)
HOLD(0)
TUNE(1)
(6) EVENT Output Registration : Registers the set mode event to actual digital output
If the value is zero, the mode event is not assigned to a digital output. So To cancel the
assigning, set the value to zero.
Description
In operation of FIX control mode, ON
In running, when the working SP is decreased
(DOWN), ON
In running, when the working SP is increased
(UP), ON
is operated like below.
Channel 2
RUN(0)
HOLD(0)
TUNE(1)
TUNE(1)
is operated like below.
Channel 2
RUN(0)
HOLD(0)
TUNE(1)
TUNE(1)
number.
DO operation
OFF
ON
ON
ON
DO operation
OFF
OFF
OFF
ON
- 54 -
Remarks
Advertisement
Table of Contents
