Adjusting The Headlight Range; Changing The Combination Instrument Battery - Husqvarna TE 250i 2021 Owner's Manual

15 ELECTRICAL SYSTEM
15.11
15.12
118

Adjusting the headlight range

H03755-10

Changing the combination instrument battery

H03756-10
H03757-10
H03758-10
Preparatory work
–
Check the headlight setting. (
Main work
–
1
Loosen screw .
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on
the lower mark for a motorcycle with rider (instructions on
how to apply the mark: Checking the headlight setting).
Info
If you have a payload, you may have to correct the
headlight range.
–
1
Tighten screw .
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove screws with the washers.
–
Pull the combination instrument upward out of the holder.
–
Using a coin, turn protection cap
clockwise and take it off.
–
Remove combination instrument battery
–
Insert the combination instrument battery with the label fac-
ing outward.
Combination instrument battery (CR 2032) (
–
Check the O-ring of the protection cap for correct seating.
–
2
Position protection cap
using a coin.
–
Press any button on the combination instrument.
The combination instrument is activated.
–
Position the combination instrument in the holder.
–
Mount and tighten the screws with washers.
p. 117)
p. 114)
2
all the way counter-
3
.
p. 153)
and turn all the way clockwise