Adjusting Line Misalignment - Canon TZ-5300 Online Manual

Adjusting Line Misalignment

If printed lines are misaligned, execute Print head angle adjustment to adjust the print head angle. Print
head angle adjustment requires you to examine a printed test pattern and adjust the angle using the angle
adjustment lever.
Always adjust the print head angle after replacing the print head.
Important
• Because the results of adjustment vary depending on the type of paper used for adjustment, use the
same type of paper as you will use for printing.
• Remove any printed documents from the top delivery tray before starting.
Removing Printed Documents from the Top Delivery Tray
Paper to Prepare
When using rolls
An unused roll at least 10.00 in. (254.0 mm) wide
When using sheets
One sheet of unused paper of at least A4/Letter size
Perform adjustment as follows.
1. Load paper. 1.
Loading Rolls in the Printer
Loading Sheets in the Printer
Important
• Always make sure the loaded paper matches the type of paper specified on the printer.
Adjustment cannot be completed correctly unless the loaded paper matches the settings.
2. Attach the basket. 2.
Using the Basket on the Front of the Printer
3. 3. Tap Maintenance on HOME screen.
Home Screen Menu Composition
The Maintenance screen appears.
4. Tap Print head angle adjustment. 4.
A confirmation message appears.
5. Tap Yes. 5.
The carriage moves and instructions for the print head angle adjustment procedure appears on the touch
screen.
415