P Eriodic Preventive Maintenance - Gamatronic CENTRIC 50 kW User Manual

11. P
ERIODIC PREVENTIVE MAINTENANCE
The Centric should be inspected on a regular basis by a trained and qualified technician to verify that the
Centric UPS and batteries are in proper electrical and physical condition.
A procedure for periodic preventive maintenance can be found in the Centric Installation Guide. It is
recommended that this inspection procedure be performed every three to six months, or in any case at
least once annually.
12. T -
HE BUILT
The Centric can be monitored from a distance over an intranet or the Internet, through the same menus
and screens used on the Centric control panel.
This feature is compatible with Windows, WIndows NT, and Linux networks.
Note: Use of the built-in web interface on Windows requires the Microsoft Internet Explorer browser
version 7 or higher.
An SNMP agent and the associated MIB are available upon request.
12.1 Preliminaries to use of the Web interface
To enable the Centric Web interface:
1 Consult with your Network Administrator to obtain an IP address for your Centric, and the
appropriate mask and gateway address.
2 Configure the Centric with the IP address. See the Centric Installation Guide for instructions to
configure the IP address.
3 Connect the Centric to the local Ethernet network using the Ethernet (RJ45) port on the rear panel of
the Centric controller. This is the port labeled "SNMP" on the controller rear panel.
4 On a computer terminal that has connectivity to the Centric IP address, open a Web browser and
enter the Centric IP address in the URL bar. For example: "//192.102.2.130" (without quotation
marks), and press Enter. You should see the Centric's main menu. From that point you can continue
as usual as if you were using the Mega's display screen. If your computer screen doesn't have touch
capability, use your mouse to make selections.
CENTRIC User Guide, rel. 3.4
G
AMATRONIC
IN WEB INTERFACE
E I L
LECTRONIC NDUSTRIES
( )
OPTION
.
TD
105