Fallback Push-Button Control Panel - Gamatronic CENTRIC 50 kW User Manual

The Centric will continue to operate as normal even when the computer is turned off, although obviously
there will be reduced functionality.
4.3

Fallback push-button control panel

In the unlikely event that the LCD display panel stops functioning due to damage or for some other reason,
it is still possible to operate the Centric via a push-button control panel located on the static switch, on
Centric's lower front panel
The push-button panel provides only the most basic functionality.
1. When the Centric is OFF, pressing the "Enable" button turns the Centric ON.
(The button is recessed to prevent accidental use.)
2. The "Inv/Byp" button toggles the load from bypass to the inverter and from the inverter to bypass.
3. Pressing the "UPS Off" button for ten seconds turns the Centric OFF. The "UPS Off" button is
located on the top front of the Centric, to the left of the LCD touch screen.
To reiterate, the fallback control panel is intended for use only when the LCD screen is not functional.
12
G
AMATRONIC
Figure 6: Location of fallback push-button control panel
Figure 7: Close-up of the push-button control panel
E I L
LECTRONIC NDUSTRIES
.
TD
CENTRIC User Guide, rel. 3.4