Setup > Connectivity - Gamatronic CENTRIC 50 kW User Manual

7.2.6 Setup > CONNECTIVITY
The functions in the "Setup > Connectivity" menu relate to the ability of the Centric to communicate with
other devices.
7.2.6.1 NETWORK CONFIGURATION OPTIONS
7.2.6.1.1 N
ETWORK CONFIGURATION
This is the right choice if your computer network supports dynamic assignment of IP addresses (DHCP).
When you mark this checkbox the Centric will request and receive an IP address from the computer
network. Obviously the Centric must be connected to the network for this to work. The network connection
is a type RJ45 socket on the rear panel of the controller module.
7.2.6.1.2 N
ETWORK CONFIGURATION
Choose this option to manually enter IP configuration information that you have received from your network
support person. Use the keyboard on the screen to enter the numbers and periods.
7.2.6.2 SNMP CONFIGURATION OPTIONS (OPTIONAL FEATURE)
7.2.6.2.1 SNMP
CONFIGURATION
You have the option of creating community names. To create a new community, do the following:
CENTRIC User Guide, rel. 3.4
G E
AMATRONIC LECTRONIC
Figure 24: "Setup > Connectivity" options
>OBTAIN IP ADDRESS AUTOMATICALLY
> USE STATIC IP ADDRESS
> ACCEPTED COMMUNITY NAMES
I L .
NDUSTRIES TD
37