Operating Elements - GRAUPNER X-8N Manual

Operating elements

1
1. Display/control panel
2. Steering wheel
Commissioning
Power supply
• Use the included single-cell LiPo battery (alternatively NiMH battery)
• Remove the cover and connect the battery in the correct polarity. Close the cover paying atten-
tion to place it correctly.
• If the voltage alarm is active, charge the battery.
• Set the battery type and the voltage alarm on the base of the battery actually in use.
• Charge with net charger.
ATTENTION
!
Never use battery chargers from other brands or other battery chargers, suitable for
other types of batteries. The battery and the transmitter can be damaged. Risk of fire!
The charge socket is protected from reverse polarity by a protection switch. Original
3
4
5
2
6
Graupner chargers detect the charge state of the battery. The al-
lowed charge current should not be higher than 1A, otherwise the
switch and other components can be damaged.
Polarity of the charging socket
INNOVATION & TECHNOLOGY
3. Aerial
4. Data socket
5. Charging port
6. Throttle/brake lever
13