GRAUPNER X-8N Manual page 41

GR-8 receiver menu in the telemetry
Display screen (only display)
S-QUA: transmission quality
S-STR: transmission power
S-dBm: transmission power in dBm
RX-TEMP: receiver temperature
LOSS PACK: Lost data packets in milliseconds
BATT VOLT: receiver voltage
LOW VOLT: warning threshold for min. receiver voltage
Setting screen for warning thresholds and telemetry
language
AL RX-V: warning threshold for receiver voltage
AL RX-T: warning threshold for receiver temperature
AL EX-V: warning threshold for ext. voltage sensor
AL EX-T: warning threshold for ext. temperature sensor
LANGUAGE: language selection (only for telemetry menu)
The current value is shown in brackets
Setting screen for channel properties
(see Chapter RF SET)
CH1 - CH4 >
Meaning of the settings:
USR1m50 : ULTRA SIGNAL 1.5 msec
FSR3m00 : FAST SIGNAL 3.0 msec
SUMD-V2 : FAST SIGNAL BUS 3.0 msec
NSR6m00 : NORMAL SIGNAL 6.0 msec
NSR12m0 : NORMAL SIGNAL 12.0 msec
NSR24m0 : NORMAL SIGNAL 24.0 msec
Display of connected components
(only display, see Chapter TELEMETRY)
Fail Safe setting screen
F/S MEMORY: select "Yes" for saving the data in the
receiver and confirm with ENTER
F/S DELAY: Fail Safe delay time
CH1(STR): FREE, HOLD, POSITION
CH2(TH): FREE, HOLD, POSITION
CH3(AUX): FREE, HOLD, POSITION
CH4(AUX): FREE, HOLD,
(see also description in Chapter FAIL SAFE)
INNOVATION & TECHNOLOGY
41