GRAUPNER X-8N Manual page 31

SW FUN menu
In this menu, you can assign a function to trim buttons,
switches and rotary controls. By default, some buttons
and switches have already been assigned functions,
which can be assigned again as all the others, as follows:
After selecting a switch with the UP/DOWN buttons, press
Enter, and the menu with the possible functions for this
switch appears.
Here you can select a function with the UP/DOWN and
INC/DEC buttons and confirm it with ENTER.
Then, the display goes back to the previous screen, where
you can see the new function behind the switch.
Meaning of the functions for TR1, 2, 3, 4, 5 and rotary control
ST TRIM
TH TRIM
3CH TRIM
4CH TRIM
ST Sub Trim
TH Sub Trim
3CH SUBT
4CH SUBT
ST Dual
ATL
ST EXPO
TH CP2
TH CP3
TH CP4
TH CP5
TH CP6
RESP FW
RESP BK
SPD ST RT
SPD ST LT
Steering trimming
Throttle trimming
Channel 3 trimming
Channel 4 trimming
Steering sub trimming
Throttle sub trimming
Channel 3 sub trimming
Channel 4 sub trimming
Steering Dual Rate
Brake travel setting
Steering exponential function
Throttle curve point 2
Throttle curve point 3
Throttle curve point 4
Throttle curve point 5
Throttle curve point 6
Throttle response point (TH RESP menu)
Brake response point (TH RESP menu)
Speed steering servo right forward path (S/SPEED menu)
Speed steering servo left forward path (S/SPEED menu)
INNOVATION & TECHNOLOGY
31