Firmware Update Receiver - GRAUPNER X-8N Manual

Firmware update receiver

Firmware update Graupner GR-8 HoTT 2.4 receiver
Updates to the receiver's firmware are made via the telemetry socket using a PC running Windows XP, Vista or 7. You
will also need a USB interface, order no. 7168.6, and adapter lead, order no. 7168.6A or 7168.S, which are available
separately.
The programs and files required can be found in the Download area for the corresponding products at www.graupner.de.
Update process
Ensure that the adapter lead is plugged into the receiver.
Start the Firmware Update Studio.
Please refer to the detailed update instructions for the item in question in the download area at
http://www.graupner.de or in the update and revision history on the start page of the website.
Connect the adapter lead 7168.S to the USB interface order no. 7168.6. The
connectors are reverse polarity protected: note the small chamfers on the sides.
Never use force – the connectors should engage easily.
CH3> Connect the adapter lead to the receiver's socket 3 (CH 3). The connectors
are reverse polarity protected: note the small chamfers on the sides. Never
use force – the connectors should engage easily.
INNOVATION & TECHNOLOGY
Select the correct COM-Port "Silicon Labs CP210x
USB to UART Bridge" under "Port Select" to which
the USB cable is connected.
Then, in the menu select the item:
"HoTT Geräte" (HoTT devices). In the opening
window, press the button "File Download" and
select the firmware file with the ending *.bin, which
was downloaded before. If everything is correct, the
file with the corresponding window appears. The
update process is started, by double-clicking the
file.
If you have not yet downloaded the file, press
the button "Auto Download". If your computer is
connected to the Internet, the respective software
is being searched. If the firmware file is displayed
now, the update process can be started by pressing
the button "File Download".
43