Reverse Menu - GRAUPNER X-8N Manual

REVERSE menu

E.P.A menu
This function sets the maximum servo travel of the servo per
channel. The left and right deflection can be set separately in
the range from 0 - 150 %. By pressing the UP/DOWN buttons,
you can move in the menu, with the ENTER button you can
select the menu item (selection has a dark background), with
INC/DEC or UP/DOWN you can change the value.
DR/EXPO menu
Steering channel setting:
D/R: 0 - 100% Setting the Dual Rate function
EXP: -100% to + 100% Setting the Exponential function
MODE: Here, the switch is shown (e.g. PS2) which has been assigned to the function ST DR/
EXPO in the SW FUN menu. The switch can be used to activate or deactivate the Dual Rate
function. (Only one pressure switch can be assigned)
SW: Here, the switch is shown (e.g. TR4) which has been assigned to the function "ST DUAL"
or "ST EXPO" in the SW FUN menu. Changes in the settings are directly shown on the display.
(A trim button or a rotary control can be assigned)
22
In this menu, the direction of the servo rotation for the
respective channel is set.
Select the channel on the left side, by pressing the UP and
DOWN buttons.
With the ENTER button, you toggle between NOR (Normal)
and REV (Reverse) and thus change the direction of the
servo's rotation.
In this menu, you can set the DR (Dual Rate) and EXPO
(Exponential) function for the steering and throttle channel.
To do so, select in the CH line: ST for steering channel, and
TH for throttle channel.