Siemens SIMOTICS S-1FL6 Compact Operating Instructions page 61

Display
Data
Func
JOG
Save
defu
dr--sd
sd--dr
Update
ABS
A.B.S.
r xxx
r -xxx
T x.x
T -x.x
xxxxxx
xxxxxx.
DCxxx.x
Exxxxx
run
Con
Getting Started
A5E37208904-003, 04/2017
Example Description
Read-only parameter group
Function group
JOG function
Save data in drive
Restore drive to default settings
Save data from drive to micro SD card/SD card
Upload data from micro SD card/SD card to drive
Update firmware
The zero position has not been set
The zero position has been set
Actual speed (positive direction)
Actual speed (negative direction)
Actual torque (positive direction)
Actual torque (negative direction)
Actual position (positive direction)
Actual position (negative direction)
Actual DC link voltage
Position following error
The motor is running
The communication between the commissioning tool
SINAMICS V-ASSISTANT and the servo drive is established.
In this case, the BOP is protected from any operations except
clearing alarms and acknowledging faults.
61