Siemens SIMOTICS S-1FL6 Compact Operating Instructions page 100

Par. No. Name
p8923[0... PROFIdrive: Subnet
3] mask of station
Description: Sets the subnet mask for the onboard PROFINET interface on the Control Unit.
The active subnet mask is displayed in r8933.
Note: The interface configuration (p8920 and following) is activated with p8925.
The parameter is not influenced by setting the factory setting.
p8925 PROFIdrive: Interface
configuration
Description: Setting to activate the interface configuration for the onboard PROFINET interface on the Control
Unit.
p8925 is automatically set to 0 at the end of the operation.
p8925 = 0: No function
•
p8925 = 2: Save and activate configuration
•
The interface configuration (p8920 and following) is saved and activated after the next POWER ON.
p29000 * Motor ID
Description: Motor type number is printed on the motor rating plate as motor ID.
For a motor with an incremental encoder, users need to manually input the parameter value.
For a motor with an absolute encoder, the drive automatically reads the parameter value.
p29001 Reversal of motor direc-
tion
Description: Reversal of motor running direction. By default, CW is the positive direction while CCW the nega-
tive direction. After changing of p29001, reference point will lost, A7461 will remind user to referencing again.
0: No reversal
•
1: Reverse
•
p29002 BOP display selection
Description: Selection of BOP operating display.
0: Actual speed (default)
•
1: DC voltage
•
2: Actual torque
•
3: Actual position
•
4: Position following error
•
p29003 Control mode
Description: Selection of control mode.
1: Basic positioner control mode (EPOS)
•
2: Speed control mode (S)
•
p29005 Braking resistor capacity
percentage alarm thresh-
old
Description: Alarm triggering threshold for the capacity of the internal braking resistor.
Alarm number: A52901
p29006 Line supply voltage
Description: Nominal Line supply voltage, effective value of line to line voltage. Drive can operate within -15%
to +10% error.
For 400 V variant servo drive, the value range is 380 V to 480 V, default value is 400 V.
For 200 V variant servo drive, the value range is 200 V to 240 V, default value is 230 V.
100
Min Max
0 255
0 3
0 65535
0 1
0 4
1 2
1 100
200 480
Factory Unit Data
Setting type
0 - U8
0 - U8
0 - U16
0 - I16
0 - I16
2 - I16
100 % Float
400/230 V U16
Effective Can be
changed
IM T, U
IM T, U
IM T
IM T
IM T, U
IM T
IM T
IM T
Getting Started
A5E37208904-003, 04/2017