Siemens SIMOTICS S-1FL6 Compact Operating Instructions page 58

You can find detailed information about the status indications in the table below:
Status indicator
RDY
Green and
COM
Control buttons
Button
58
Color Status
- Off
Green Continuously lit
Red Continuously lit
Flash at 1 Hz
Flash alternatively at
yellow 2 Hz
Green Continuously lit
Flash at 0.5 Hz
Flash at 2 Hz
Red Continuously lit
Description
M button
OK button
UP button
DOWN button
SHIFT button
Press the key combination for four seconds to restart the drive
Moves current display to the left page when
example
Moves current display to the right page when
example
24 V control board power supply is missing
The drive is in "servo on" state
The drive is in "servo off" state or in the startup state
Alarms or faults occurs
Drive identification
PROFINET communication is working with IRT
PROFINET communication is working with RT
Micro SD card/SD card operating (read or write)
Communication error (always put the PROFINET communica-
tion error as the first consideration)
Exits from the current menu
•
Switches between operating modes in the top level
•
menu
Short-pressing:
Confirms selection or input
•
Enters sub menu
•
Acknowledges faults
•
Long-pressing:
Activates auxiliary functions
JOG
•
Saves parameter set in drive (RAM to ROM)
•
Sets parameter set to default
•
Transfers data (drive to micro SD card/SD card)
•
Transfers data (micro SD card/SD card to drive)
•
Updates firmware
•
Navigates to the next item
•
Increases a value
•
JOG in CW (clockwise)
•
Navigates to the previous item
•
Decreases a value
•
JOG in CCW (counter-clockwise)
•
Moves the cursor from digit to digit for single digit editing,
including the digit of positive/negative sign
Note:
When the sign is edited, "_" indicates positive and "-" indi-
cates negative.
.
.
Description
Functions
is displayed at the upper right corner, for
is displayed at the lower right corner, for
A5E37208904-003, 04/2017
Getting Started