Adtech ADT-CNC4620 Maintenance Manual page 60

Adtech CNC Technology Co., Ltd.
049 Controler ID
Range
Unit
Authority
Default
Effective time
Note
050 X HomeDir
051 Y HomeDir
052 Z HomeDir
053 4 HomeDir
Range
Unit
Authority
Default
Effective time
Note
054 Circle InpUnit(mm)
Range
Unit
Authority
Default
Effective time
Note
055 G73(M)LoopObligate(mm)
056 G83(M)LoopObligate(mm)
Range
Unit
Authority
Default
Effective time
Note
057 ArcSpeedUpVal
Range
Unit
Authority
Default
Effective time
Note
058 interpolation speed mode
Range
Unit
Authority
Default
- 56 -
: 1~255
: None
: Operation admin or higher
: 1
: Restart
: The ID number setting of the controller when DNC or other PC software
and this controller are in MODBUS communication mode
: 0~1
: None
: Operation admin or higher
: 1, 1, 0, 0
: Instant
: Set the mechanical home direction of every processing axis
Positive
Negative
: 0~1
: mm
: Operation admin or higher
: 0.2
: Instant
: Set the arc interpolation equivalent
If this value is too small, the arc has higher approximation accuracy, but
the computation will be too high, making the pause during processing
obvious and affecting the processing effect.
: 0.1~100
: mm
: Operation admin or higher
: 2.000
: Instant
: Set the tool retracting amount after Q is fed in G73 and G83 instructions; this
parameter (default: 2mm) is set according to actual chip removal effect.
: 10~500
: mm/sec
: Operation admin or higher
: 100
: Instant
: Set arc acceleration equivalent
If this value is too small, the acceleration will be slow; please select a
higher value according to the arc size.
: 0~1
: None
: Operation admin or higher
: 0 (acceleration)
11. Program saving & editing