Plot, Odd Dot (P-Series Normal Density Graphics) - Printronix P3000 Series User's Reference Manual

Plot, Odd Dot (P–Series Normal Density Graphics)
P–Series
Serial
Purpose
Comment
Example
Programming
ASCII
ENQ
SFCC e
N/A
Prints dots at the odd numbered dot columns.
This is the P–Series programming normal density graphics control code. The ENQ
code should occur before any printable data in the data stream. For high density
graphics, the Even Dot Plot code (04 hex) must be used in conjunction with (and
precede) the Odd Dot Plot code. Refer to the P–Series Compatible Plot Mode sec-
tion in the Graphics chapter for detailed plot mode information.
Print two normal density plot boxes using odd dot plot. Compare the odd dot plot
example below to the high density Even Dot Plot example on page 6–54.
Hex
05
SFCC 65
N/A
Decimal
05
SFCC 101
N/A
6–55