Overscoring - Printronix P3000 Series User's Reference Manual

Overscoring

P–Series
Serial
Purpose
where
Comment
Example
Programming
ASCII
SFCC _ n
ESC _ n
Enables or disables automatic overscoring of all characters.
n = 0 to disable automatic overscoring (hex 00 or hex 30)
n = 1 to enable automatic overscoring (hex 01 or hex 31)
When automatic overscore is enabled, all characters, including spaces, are over-
scored until overscoring is disabled.
The following sample program illustrates automatic overscoring and overscoring
reset.
Hex
SFCC 5F n
1B 5F n
Decimal
SFCC 95 n
27 95 n
6–53