Extended Character Set - Printronix P3000 Series User's Reference Manual

Extended Character Set

P–Series
Serial
Purpose
Comment
6–38
ASCII
SO (Shift Out)
SFCC SO
SFCC n
SFCC 4
ESC 4
Accesses the extended character set in the range A0 to FF hex using codes 20 to 7F
hex.
Used in 7–bit systems as if data bit 8 was set to 1. For example, sending code 20 hex
accesses the symbol at code point A0 hex. If a printable symbol is not available at
the code point, a space is printed.
SFCC 4 is not cancelled by the next paper motion command; all other commands are
cancelled by paper motion.
Refer to the character set charts in Appendix B.
Hex
0E
SFCC 0E
SFCC 6E
SFCC 34
1B 34
Decimal
14
SFCC 14
SFCC 110
SFCC 52
27 52
Programming