F/L Switch - Printronix P3000 Series User's Reference Manual

Barcode 145 at 12.1 cpi
Barcode 160 at 13.3 cpi
NOTE: Print mode control from the host computer overrides the control panel setting.

F/L Switch

The F/L (Forms Length switch functions only with the printer off line. Press F/L to enter the Forms
Length menus.
You can select Forms Length in inches or lines via printer configuration. Refer to the Setting Forms
Length section on page 2–15.
You can also set Forms Length by control code from the host computer. Forms length control from the
host computer overrides the control panel setting. Refer to the Programming chapter for details.
2–8 Operation