Printronix P3000 Series User's Reference Manual page 112

Character Set Select: International Languages (continued)
Comment
Example
6–26
The international character set can also be selected from the control panel. The con-
trol code setting overrides the control panel character set selection. Values other
than those selectable from Table 6–4 are ignored, except for SFCC RX discussed
below. In PSET mode, values outside the range on Table 6–4 produce an error mes-
sage (Command Line Error Messages are listed on page 6–3). Refer to the individ-
ual character set charts in Appendix B.
Selecting SFCC RX accesses the character substitution table defined by SFCC V for
the current base character set. Refer to SFCC V, Download a Language, on page
6–31.
The following example illustrates international character selection using the IBM
PC character set.
Programming