Printronix P3000 Series User's Reference Manual page 106

x 0(30)
z IBM PC
0(30) IBM PC
Extended Set
1(31)
2(32)
3(33)
4(34)
5(35)
6(36)
7(37)
8(38)
9(39)
10(3A)
11(3B)
12(3C)
Comment
6–20
Table 6–3. Extended Character Set Select (z)
1(31)
Multinational
Multinational
Extended Set
If the asterisk (*) is the value selected for x, the character set will not change. If * is
the value selected for y or z, the previously selected international language and/or
extended character set for the selected character set is used.
If X is the value selected for y, the primary language will access the downloaded
character substitution table defined by SFCC V for the selected character set. SFCC
V, Download a Language, is discussed on page 6–31.
The character set, international language and extended character set can also be se-
lected from the printer control panel. The control code setting overrides the control
panel selection. Except for the asterisk and X values discussed above, values other
than those shown in the tables result in the control sequence being terminated.
Refer to Appendix B for individual character set charts.
2(32)
ECMA–94
Latin 1
Multinational DP 10 cpi
Multinational DP 12 cpi
Multinational NLQ 10 cpi
Multinational (at Primary set
mode and pitch)
3(33)
DEC
Multinational
DEC Multinational
Extended Set
Programming