Forms Control - Printronix P3000 Series User's Reference Manual

Forms
Paper
Type
Thickness
Sheet Thickness
Drive
Slew Rate
Labels
On Backing
Sheet Size
Thickness

Forms Control

Skip–Over Perforation
Vertical Format Units (VFU) IBM Serial Matrix Vertical Tabs
Miscellaneous
Ribbon
Standard
Carbon Black
Fabric
NOTE: Use only ribbons that meet the stated specifications.
C–4
Edge–perforated, fanfold, 3 to 16" wide
Single–part – 15 to 100 lb. stock
Multi–part – 1– to 6–part forms
0.025" maximum
Adjustable tractors (6–pin engagement)
8" per second maximum
One–part continuous perforated fanfold back form.
Labels must be placed at least 1/6 inch from the
fanfold perforation. Backing adhesive must not be
squeezed out during printing.
3 to 16" wide, including the two standard
perforated tractor feed strips. A maximum sheet size
of 12" between top and bottom perforations.
Not to exceed 0.025" (including backing sheet)
1, 1/2, 2/3, 5/6 inch; Control Panel Selectable
Programmable P–Series EVFU
Dataproducts compatible direct access DVFU
Printronix P/N 107463
Printronix P/N 108506 OCR
Nylon, 1 inch x 60 yards
spool–to–spool;
Metal reverses on each end
Appendix