Underline - Printronix P3000 Series User's Reference Manual

Underline

P–Series
Serial
Purpose
where
Comment
Example
6–66
ASCII
SFCC – n
ESC – n
Enables or disables automatic underlining of all characters.
n = 0 to disable automatic underlining (hex 00 or hex 30)
n = 1 to enable automatic underlining (hex 01 or hex 31)
When automatic underline is enabled, all characters, including spaces, are under-
lined until underlining is disabled.
The following sample program illustrates automatic underlining and underlining
reset.
Hex
SFCC 2D n
1B 2D n
Decimal
SFCC 45 n
27 45 n
Programming