Printer Reset - Printronix P3000 Series User's Reference Manual

Printer Reset

P–Series
Serial
Purpose
Comment
6–56
ASCII
SFCC @
ESC @
Initializes all print mode related parameters to values previously saved.
When reset to the previously saved values, the current line is set to the top–of–form
position. Print mode, line spacing, international language selection, form length,
skip–over perforation, and character pitch are reset to previously saved values. (In
the Serial Matrix protocol, this command sets horizontal tabs at every eighth char-
acter column.) Character–by–character and line–by–line attributes are canceled.
The vertical format unit is cleared. Interface parameters and emulation mode (P–Se-
ries or Serial Matrix) are not affected.
Hex
SFCC 40
1B 40
Decimal
SFCC 64
27 64
Programming