Printer Deselect - Printronix P3000 Series User's Reference Manual

Printer Deselect

P–Series
Serial
Purpose
Comment
NOTE: When the configuration parameter PRINTER SELECT is enabled and saved in
NOVRAM, the printer powers up in the deselected state.
Programming
ASCII
N/A
DC3
Places printer in the deselected state.
When the configuration parameter PRINTER SELECT is enabled, this control code
disables the printer from receiving and printing data from the host. Until a DC1
(Printer Select) command is received, all subsequent data to the printer is ignored.
Hex
N/A
13
Decimal
N/A
19
6–61