Entering Setup; Using The Menu Button; Using The Submenu Button - Printek FormsMaster 8000 Operator's Manual

P R I N T E R C O N F I G U R A T I O N
a "what you see is what you get" basis. This means that whatever value is
last displayed for an item is the value that will be saved when Setup mode
is exited.

Entering Setup

To enter Setup, simply take the printer off line and press the SETUP button.
The ONLINE indicator will begin to flash yellow and the display will
temporarily show the following.
Setup Menus
After the above message has been shown, the display will change to the first
menu available, which is the
the display will also show the first submenu which will be the form that
was selected when Setup was pressed.
FORMS MENU
Form 0

Using the MENU Button

At this time you may select a different menu by pressing the MENU button
(closest to where
the
INTERFACE MENU
button will also display an option for exiting Setup. If you do not wish to
exit Setup at this time, press the button indicated for
press the MENU button to select the desired menu. The MENU button may
be pressed at any time to select a different menu.

Using the SUBMENU Button

The SUBMENU button selects additional menus that are related to the
selected menu. For instance, if the
SUBMENU button (closest to where the form number is displayed) will select
which form (
Form 0
40
Entering
FORMS MENU
FORMS MENU
, the
OPTIONS MENU
through
Form 9
as shown below. In this case
is displayed). Other menus available are
, and the
FORMS MENU
) is to be set up. Note that not all
.
TEST MENU
and continue to
No
has been selected, the
This