Printek FormsMaster 8000 Operator's Manual page 35

Informing the Printer That the New Form is Loaded
11.Press the LOAD button. The display will now show that the new
form has been "loaded".
12.If your printer is a FormsMaster 8003 you may repeat the above steps
to load additional forms at this time.
13.Close the paper door.
14.Make sure the correct form to be positioned for printing is selected
and press either the LOAD button or the ONLINE button. The LOAD
button will position the form for printing but will not place the
printer on line. The ONLINE button will both position the form and
place the printer on line. Note that the first time the printer is placed
on line after a new form is loaded, the form(s) currently known to be
loaded by the printer will scroll across the display as the printer goes
on line. The operator should observe the forms displayed to confirm
that the correct forms are recognized as loaded.
New form loaded in tractors
D A I L Y O P E R A T I O N
29