Ethernet 10Baset Lan Interface Items - Printek FormsMaster 8000 Operator's Manual

Possible Values:
This item selects whether the minimum I/O buffer size should be used.
Setting this item to
I/O buffer (see "Paper Out Fault" on page 80 for more information on buffer
size). Setting this to
using the printer with operating systems that try to keep track of which page
is currently being printed by the printer.

Ethernet 10BaseT LAN Interface Items

INTERFACE MENU
LAN
Emulation
Possible Values:
This item selects the emulation to be used whenever the LAN port is active
(see "Automatic Port Switching" earlier in this section). The emulation
should be set to match the type of printer your software supports.
Automatic Carriage Return
P R I N T E R C O N F I G U R A T I O N
No*, Yes
will allow the printer to make maximum use of the
No
may decrease performance, but is useful when
Yes
Epson*, Basic Bar Codes, IBM
Proprinter, DEC LA120, TTY,
Printek, ANSI X3.64
Emulation
Epson
Auto CR
On
57