Options Menu - Printek FormsMaster 8000 Operator's Manual

OPTIONS MENU

The
OPTIONS MENU
form or specific interface, but rather affect how the printer works under all
conditions. To access the options menu, enter Setup and then press MENU
until
OPTIONS MENU
OPTIONS MENU
Note that the options menu has no submenus. Therefore, press either of the
ITEM buttons to begin displaying the items available. The factory default
values are indicated with an asterisk (*) in this manual (the asterisk does not
appear on the printer's display).
Maximum Form Allowed
Possible Values:
This item sets the last form number to be displayed for operator selection
with the FORM SELECT button or while in the FORMS MENU. This
allows the operator to see only the forms that are in use rather than having
to sort through several unused forms.
Note that when setting this value that you may not select a value less than
the form currently selected when Setup was entered, or less than the form
currently selected in the "Setup: FORMS" menu.
Automatic Scroll Delay
Possible Values:
This item sets the number of seconds to delay before scrolling the top of
form to the tear bar when the printer is idle (no additional data received since
the last print operation) and a form boundary (bottom of the form according
P R I N T E R C O N F I G U R A T I O N
contains items which do not pertain only to a specific
is displayed
Form 0 ... Form 2* ... Form 9
Off, 1* to 15 Second Delay
Max Form Allowed
Form 2
Auto-Scroll
1 Second Delay
79