Advanced Setup Features; Security Menu - Printek FormsMaster 8000 Operator's Manual

Advanced Setup Features

SECURITY MENU

The is for Information System managers who want to be
SECURITY MENU
able to set up a printer and then "lock out" operator changes to the various
menus. This method of security may be set independently for the Align
Print, the Forms menu, the Interface menu, or the Options menu.
When set to , the user is allowed to make changes to any item
Edit Allowed
in the menu selected. When set to , the operator can look at the
View
settings, but cannot edit, or change the values. When set to , the
Initialize
printer will reset all values in that menu (and associated submenus) to the
factory default values and security will be set back to .
Edit Allowed
The SECURITY MENU is more difficult to enter than other menus. To be
able to access this menu, the printer must be powered on while pressing the
MENU button. After the printer has finished its power up self-tests, enter
Setup and press the MENU button until
is displayed on
SECURITY MENU
the top line. Next press either of the ITEM buttons to begin setting
security.
Align Print
Align Print
Edit Allowed
Possible Values:
Edit Allowed, View Only, Initialize
This item selects whether values set using Align Print (see Aligning Print
on page 34) can be edited or only viewed by the operator. will
Initialize
reset the Align Print values for all forms to zero.
89