Printek FormsMaster 8000 Operator's Manual page 65

Possible Values:
This item selects whether the minimum I/O buffer size should be used.
Setting this item to
I/O buffer (see "Paper Out Fault" on page 80 for more information on buffer
size). Setting this to
using the printer with operating systems that try to keep track of which page
is currently being printed by the printer.
Coax/Twinax Interface Items
When Configured for Coax Operation
INTERFACE MENU
Coax
When the optional Coax/Twinax Interface is installed, the printer will
automatically determine which of these two interfaces are being used by
sensing which adapter cable is attached to the printer at power on. If the
Coax adapter is attached, the following Setup items will be displayed. If
you are using the printer in a Twinax Configuration, refer to the next section
of this chapter.
Printer Emulation
Possible Values:
This item selects the IBM printer model to be emulated.
Maximum Print Position
Possible Values: 1
P R I N T E R C O N F I G U R A T I O N
No*, Yes
will allow the printer to make maximum use of the
No
may decrease performance, but is useful when
Yes
3287*, 3262
32*, None
PrinterEmulation
3287
Max Print Pos
132
59