Printek FormsMaster 8000 Operator's Manual page 50

P R I N T E R C O N F I G U R A T I O N
next path, or paths, and continue printing until all the specified paths are
empty
Automatic Cut
Possible Values:
This item is only available when the optional FormsCutter is installed in
the printer. When set to
the perforation (based upon the Form Length setting) and eject the form into
the paper basket that is installed with the FormsCutter. If set to
paper will exit through the lower, continuous paper path into the basket on
the print stand. To manually cut a form or report at the end of the current
page, the user can take the printer offline and press the UNLOAD button. See
the FormsMaster 8000 Series FormsCutter Manual for additional
information.
Cut Adjustment
Possible Values:
This item may be used to adjust the position of the cut relative to the top-
of-form for improved cut accuracy. This item is only available when the
optional FormsCutter is installed. Refer to the FormsCutter manual for
more information.
Lines Per Inch
Possible Values:
This item sets the line pitch to 6 or 8 Lines Per Inch (LPI).
44
No*, Yes
, the printer will automatically cut each form at
Yes
Auto, -0.2951" ... 0* ... +0.2951", Auto
6*, 8
Automatic Cut
No
, the
No
Cut Adjustment
Lines/Inch
0
6