Printek FormsMaster 8000 Operator's Manual page 58

P R I N T E R C O N F I G U R A T I O N
Possible Values:
This item enables or disables automatic Line Feeds (LF) when a Carriage
Return (CR) is received.
Perform Host Form Feed at Top-of-Form
Possible Values:
This item selects whether Form Feeds (FF) will be performed when
received from the host computer if the paper is already positioned at the top
of form (TOF). Setting this item to
Characters
Possible Values:
This item selects whether certain control character symbols will be printed
or be treated as control characters. The effect of this is dependent upon the
selected.
Emulation
Minimum Buffer
Possible Values:
This item selects whether the smallest possible I/O buffer should be used.
Setting this item to
I/O buffer (see "Paper Out Fault" on page 80 for more information on buffer
size). Setting this to
using the printer with operating systems that try to keep track of which page
is currently being printed by the printer. This may also be useful when
using serial I/O with systems that do not respond quickly enough to
handshake signals.
52
Off*, On
No*, Yes
Control*, Printable
No*, Yes
will allow the printer to make maximum use of the
No
may decrease performance, but is useful when
Yes
will help prevent blank pages.
No
Host FF at TOF
Characters
Control
Minimum Buffer
Off
No
No