Printek FormsMaster 8000 Operator's Manual page 104

A D V A N C E D S E T U P F E A T U R E S
The first form will begin printing one line from the top-of-form, be named
"CHECKS", have a form length of 42 lines (7 inches at 6 LPI), and use the
Epson FX Draft font.
The second form will begin printing two characters (at 10 CPI) from the left
edge and two lines (at 6 LPI) from the top edge of the form. The name will
be "INVOICES" and will print using the Epson FX Draft font.
The third form will begin printing two lines (at 8 LPI) from the top edge of
the form. The name will be "REPORTS", and printing will be at eight
LPI with a form length of 8_ inches.
; Example setup file for three forms.
[BeginPrintekSetup]
AlignPrint=FactoryDefaults
Forms=FactoryDefaults
[Form0]
MovePrintDown=0.17
FormName="CHECKS"
FormLength=42
Font=Epson_FX_DF
[Form1]
MovePrintRight=0.20
MovePrintDown=0.33
FormName="INVOICES"
Font=Epson_FX_DF
[Form2]
MovePrintDown=0.25
FormName="REPORTS"
LinesPerInch=8
FormLength=68
CharactersPerInch=12
[EndPrintekSetup]
98