Checking The Configuration - Huawei AR530 series Configuration Manual

Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
l
l
----End

9.6.1.5 Checking the Configuration

Prerequisites
The configurations for local bridging are complete.
Procedure
l
l
----End
9.6.2 Configuring Local Bridging Integrated with IP Routing
Configuring local bridging integrated with IP routing allows users in the same geographical
location but on different network segments to communicate with each other.
9.6.2.1 Creating a Bridge Group
Context
A bridge group is a virtual group. It can forward packets only after interfaces have been added
to the group.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Issue 01 (2014-11-30)
By default, no static MAC address entry is configured. In a bridge group, each MAC address
entry can be configured as only one static entry. If the MAC address entry is configured as
a static entry repeatedly, the last configuration overwrites the previous configuration.
Run:
mac-address blackhole mac-address bridge bridge-id
A blackhole MAC address entry is configured for a bridge group.
By default, no blackhole MAC address entry is configured.
Run:
mac-address aging-time seconds bridge
The aging time is configured for a dynamic MAC entry.
The configured aging time takes effect on the dynamic MAC address entries of all bridge
groups.
Run the display bridge [ bridge-id ] information command to view information about the
bridge group.
Run the display bridge traffic [ bridge birdge-id | interface interface-type interface-
number ] command to view the traffic statistics on a specified interface in the bridge group.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Transparent Bridging Configuration
363