Huawei AR530 series Configuration Manual page 403
Industrial switch routers ethernet switching
Hide thumbs
Also See for AR530 series:
- Configuration manual (310 pages) ,
- Quick start manual (9 pages) ,
- Hardware installation and maintenance manual (219 pages)
Table of Contents
Advertisement
Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
Issue 01 (2014-11-30)
<Huawei> system-view
[Huawei] sysname RouterA
[RouterA] bridge 1
[RouterA-bridge1] routing ip
[RouterA-bridge1] quit
[RouterA] bridge 2
[RouterA-bridge2] routing ip
[RouterA-bridge2] quit
# Add Eth2/0/1 and Eth2/0/2 to VLAN 11 to allow the communication between User
1 and User 2.
[RouterA] vlan 11
[RouterA-vlan11] quit
[RouterA] interface ethernet 2/0/1
[RouterA-Ethernet2/0/1] port link-type access
[RouterA-Ethernet2/0/1] port default vlan 11
[RouterA-Ethernet2/0/1] quit
[RouterA] interface ethernet 2/0/2
[RouterA-Ethernet2/0/2] port link-type access
[RouterA-Ethernet2/0/2] port default vlan 11
[RouterA-Ethernet2/0/2] quit
#Add VLANIF 11 to bridge group 1.
[RouterA] interface vlanif 11
[RouterA-Vlanif11] bridge 1
[RouterA-Vlanif11] quit
# Add Ethernet3/0/0 on Router A to bridge group 2.
[RouterA] interface ethernet 3/0/0
[RouterA-Ethernet3/0/0] bridge 2
[RouterA-Ethernet3/0/0] quit
# Create Bridge-if interface 1 for bridge group 1 and Bridge-if interface 2 for bridge
group 2, and then configure IP addresses for the two Bridge-if interfaces.
[RouterA] interface bridge-if 1
[RouterA-Bridge-if1] ip address 10.1.1.3 255.255.255.0
[RouterA-Bridge-if1] quit
[RouterA] interface bridge-if 2
[RouterA-Bridge-if2] ip address 10.1.2.3 255.255.255.0
[RouterA-Bridge-if2] quit
2.
Configure RouterB.
# Create bridge group 2 and enable the IP routing function for the bridge groups.
<Huawei> system-view
[Huawei] sysname RouterB
[RouterB] bridge 2
[RouterB-bridge2] routing ip
[RouterB-bridge2] quit
# Add Ethernet2/0/0 to VLAN11.
[RouterB] vlan 11
[RouterB-vlan11] quit
[RouterB] interface ethernet 2/0/0
[RouterB-Ethernet2/0/0] port link-type access
[RouterB-Ethernet2/0/0] port default vlan 11
[RouterB-Ethernet2/0/0] quit
#Add VLANIF 11 to bridge group 2.
[RouterB] interface vlanif 11
[RouterB-Vlanif11] bridge 2
[RouterB-Vlanif11] quit
# Add Ethernet3/0/0 on Router B to bridge group 2.
[RouterB] interface ethernet 3/0/0
[RouterB-Ethernet3/0/0] bridge 2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Transparent Bridging Configuration
389
Hide quick links:
Advertisement
Table of Contents
