Common Configuration Errors - Huawei AR530 series Configuration Manual

Industrial switch routers ethernet switching
Hide thumbs Also See for AR530 series:
Table of Contents

Advertisement

Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
l

2.9 Common Configuration Errors

This section describes common configuration errors.
2.9.1 Traffic Is Unevenly Load Balanced Among Eth-Trunk Member
Interfaces Because the Load Balancing Mode Is Incorrect
Fault Description
Traffic is unevenly load balanced among Eth-Trunk member interfaces due to the incorrect load
balancing mode.
Procedure
1.
2.
2.10 References
This section describes references of link aggregation.
The following table lists the reference of this document.
Issue 01 (2014-11-30)
ip address 10.1.1.1 255.255.255.0
#
interface Ethernet1/0/0
eth-trunk 1
#
interface Ethernet2/0/0
eth-trunk 1
#
return
Configuration file of RouterB
#
sysname RouterB
#
interface Eth-Trunk1
undo portswitch
ip address 10.1.1.2 255.255.255.0
#
interface Ethernet1/0/0
eth-trunk 1
#
interface Ethernet2/0/0
eth-trunk 1
#
return
Run the display eth-trunk command to check whether the load balancing mode of the Eth-
Trunk meets networking requirements. For example, source or destination IP address-based
load balancing is not recommended in Layer 2 networking.
Run the load-balance command to set an appropriate load balancing mode.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Link Aggregation Configuration
68

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ar550 series

Table of Contents