Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
Multiple VLANs belongs to different Layer 3 devices
Figure 3-18 Networking diagram of communications between multiple VLANs on different
Layer 3 devices
Company A Company B Company C
VLAN 2
As shown in
In such a situation, you can configure a VLANIF interface respectively on Switch A and Switch
B for each VLAN, and then configure the static route or run a routing protocol between Switch
A and Switch B.
The Layer 3 device shown in
3.3.3 VLAN Aggregation
Issue 01 (2014-11-30)
Router A
Trunk Link
L2 Switch
VLAN 3
Figure
3-18, VLAN 2, VLAN 3, and VLAN 4 are VLANs across different switches.
NOTE
AR550 series do not support VLAN Aggregation.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Trunk Link
Company A Company B Company C
VLAN 4
VLAN 2
Figure 3-18
can be a router or a Layer 3 switch.
3 VLAN Configuration
Router B
Trunk Link
L2 Switch
VLAN 3
VLAN 4
91