Checking The Configuration - Huawei AR530 series Configuration Manual

Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
The value of the LeaveAll timer is set.
The default value of the LeaveAll timer is 1000 centiseconds (10 seconds).
The Leave timer length on an interface is restricted by the global LeaveAll timer length. When
configuring the global LeaveAll timer, ensure that all the interfaces configured with a GARP
Leave timer are working properly.
Step 3 Run:
interface interface-type interface-number
The interface view is displayed.
Step 4 Run:
garp timer { hold | join | leave } timer-value
The value of the Hold timer, Join timer, or Leave timer is set.
By default, the value of the Hold timer is 40 centiseconds, the value of the Join timer is 80
centiseconds, and the value of the Leave timer is 240 centiseconds.
----End

5.5.4 Checking the Configuration

Procedure
l
l
l
----End
5.6 Maintaining GVRP
This section describes how to clear the GVRP statistics.
5.6.1 Clearing GVRP Statistics
Context
GVRP statistics cannot be restored after being cleared. Confirm your action before using this
command.
Issue 01 (2014-11-30)
Run the display gvrp status command to view the status of global GVRP.
Run the display gvrp statistics [ interface { interface-type interface-number [ to interface-
type interface-number ] }&<1-5> ] command to view the GVRP statistics on an interface.
Run the display garp timer [ interface { interface-type interface-number [ to interface-
type interface-number ] }&<1-5> ] command to view the values of the GARP timers.
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 GVRP Configuration
156