Configuration Task Summary - Huawei AR530 series Configuration Manual

Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
Figure 8-13 Networking diagram for SEP multi-instance
VLAN 100~200

8.4 Configuration Task Summary

This section describes the configuration task and logic of SEP.
Table 8-9
Table 8-9 Configuration task summary of SEP
Item
Configuring Basic SEP
Functions
Issue 01 (2014-11-30)
Router2
Segment2
P2
SEP Segment1
Router1
Instance1:
CE1
lists the configuration task summary of SEP.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Router4
SEP
P1
Router3
Instance2:
VLAN 201~400
CE2
Primary Edge Port
Secondary Edge Port
Block Port
Description
After basic SEP functions are
configured on devices, the
devices start SEP
negotiation. One of the two
interfaces that complete
neighbor negotiations last is
blocked to eliminate
redundant links.
NOTE
When logging in to nodes on a
SEP semi-ring through Telnet
to configure the nodes, note the
following points:
l Basic SEP functions need
to be configured from the
node at one end of the semi-
ring to the node at the other
end of the semi-ring.
8 SEP Configuration
Task
8.5.1 Configuring Basic
SEP Functions
299