Huawei AR530 series Configuration Manual page 163

Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
One-Way Registration
Figure 5-5 One-way registration of a VLAN attribute
Static VLAN 2 is created on RouterA. Ports on RouterB and RouterC can join VLAN 2
automatically through one-way registration. The process is as follows:
1.
2.
3.
4.
Issue 01 (2014-11-30)
RouterA
Static vlan 2
Port 1 JoinEmpty
Port 2
RouterB
After VLAN 2 is created on RouterA, Port 1 of RouterA starts the Join timer and Hold
timer. When the Hold timer expires, Port 1 sends the first JoinEmpty message to RouterB.
When the Join timer expires, Port 1 restarts the Hold timer. When the Hold timer expires
again, Port 1 sends the second JoinEmpty message.
After Port 2 of RouterB receives the first JoinEmpty message, RouterB creates dynamic
VLAN 2 and adds Port 2 to VLAN 2. In addition, RouterB requests Port 3 to start the Join
timer and Hold timer. When the Hold timer expires, Port 3 sends the first JoinEmpty
message to RouterC. When the Join timer expires, Port 3 restarts the Hold timer. When the
Hold timer expires again, Port 3 sends the second JoinEmpty message. After Port 2 receives
the second JoinEmpty message, RouterB does not take any action because Port 2 has been
added to VLAN 2.
After Port 4 of RouterC receives the first JoinEmpty message, RouterC creates dynamic
VLAN 2 and adds Port 4 to VLAN 2. After Port 4 receives the second JoinEmpty message,
RouterC does not take any action because Port 4 has been added to VLAN 2.
Every time the LeaveAll timer expires or a LeaveAll message is received, each router
restarts the LeaveAll timer, Join timer, Hold timer, and Leave timer. Then Port 1 repeats
step 1 to send JoinEmpty messages. Port 3 of RouterB sends JoinEmpty messages to
RouterC in the same way.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
RouterC
Port 4
JoinEmpty
Port 3
5 GVRP Configuration
149