Chapter 4 Access To Web-Based Interface; Login To Web Browser Interface - Compex CGX3224 User Manual

Chapter 4 Access to Web-based Interface
Chapter 4 Access to Web-based Interface
After setting up Compex CGX3224, install a browser on the PC or workstation. Make sure that
TCP/IP protocol is installed and configured. Configuration will be much simpler if you decided
to obtain IP address dynamically and use the gateway default IP addresses. Compex CGX3224
is designed with a built-in DHCP server. When WAN setup has done, the system will
automatically assigns IP addresses, DNS and Gateway information to the computers connected
in the same network. It has been pre-configured with IP address and Subnet Mask of
192.168.100.128 and 255.255.255.0 respectively.
An Internet browser would be used to configure Compex CGX3224. The most commonly used
browsers include Netscape Navigator, Netscape Communicator and Microsoft Internet Explorer
browsers as they support frames and Java. We recommend you to use the Netscape
Communicator V4.06 and higher, or Microsoft Internet Explorer 4.0 and higher.
Start by running your browser on a workstation connected onto the same network as Compex
CGX3224. Enter URL Address, http://192.168.100.128.
4.1

Login to Web Browser Interface

The following is a list of the various ways different browsers access a website. Follow
the instructions for the browser that you use.
In Netscape Navigator
1. Select the File menu, then select Open Location.
2. In the Open Location dialog box, enter the IP address of the Gateway. The default
address is http://192.168.100.128.
3. Click on the Open button.
In Netscape Communicator
1. Select the File menu, and then press Open Page.
2. In the Open Page dialog box, enter the IP address of the Gateway. The default
address is http://192.168.100.128.
3. Make sure the Navigator radio button is selected then click the Open button.
11