How To View All Active Ports Link/Act Status; How To View The Connection Speed Of Those Active Port; How To View Which Active Ports Are Connected At Full Or Half Duplex Mode - Compex ReadyLINK DS2216 Quick Install Manual

•

How to view all active ports Link/Act status

To view the currently active ports Link and Activity status, press the
Mode button several times until the Link/Act LED lights up.
All ports LEDs that light up and/or blinking are the link and activity
status of these active ports.
•

How to view the connection speed of those active port

To view this, press Mode button several times until the Speed LED
lights up. Those ports LEDs that light up indicate that they are connect
at 100Mbps speed. Those that did not light up are either inactive or not
connected.
If there are active ports but their LEDs did not light up, this indicates
that they are connected at 10Mbps speed.
•
How to view which active ports are connected at Full or Half
Duplex mode
To view this, press the Mode button several times until the FDX/Col
LED lights up. Those ports LEDs that light indicate they are connected
at Full-Duplex mode. Those port LEDs not lighted up are either
inactive or not connected.
If there are active ports but their LEDs did not light up, then they are
connected at Half-Duplex mode.
8 Compex 16-Port All 10/100 Switch
DS2216
English