D Emand M Etering - GE Multilin 469 Instruction Manual

CHAPTER 6: ACTUAL VALUES
6.3.6 Demand Metering
DEMAND
]
6.3.7 Analog Inputs
ANALOG
]
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
PATH: ACTUAL VALUES
[
METERING
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The values for current and power demand are shown. The power demand values are not
shown if the
VT RATIO
the
S1 469 SETUP CLEAR DATA
shown only for positive real and positive reactive power.
PATH: ACTUAL VALUES
[
INPUTS
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
A2 METERING DATA
CURRENT
DEMAND: 0 Amps
REAL POWER
DEMAND: 0 kW
REACTIVE POWER
DEMAND: 0 kvar
APPARENT POWER
DEMAND: 0 kVA
PEAK CURRENT
DEMAND: 0 Amps
PEAK REAL POWER
DEMAND: 0 kW
PEAK REACTIVE
POWER
PEAK APPARENT
POWER
is programmed as "None". Peak Demand information is cleared with
CLEAR PEAK DEMAND DATA
A2 METERING DATA
ANALOG I/P 1
0 Units
ANALOG I/P 2
0 Units
ANALOG I/P 3
0 Units
ANALOG I/P 4
0 Units
ANALOG 1-2
0 Percent
ANALOG 1-2
0 Units
DEMAND METERING
Range: 0 to 100000 A
Range: 0 to 99999 kW
Range: 0 to 99999 kvar
Range: 0 to 65535 kVA
Range: 0 to 100000 A
Range: 0 to 99999 kW
Range: 0 to 99999 kvar
Range: 0 to 65535 kVA
settings. Demand is
ANALOG INPUTS
Range: –50000 to 50000. Seen only if
Analog Input is programmed.
Range: –50000 to 50000. Seen only if
Analog Input is programmed.
Range: –50000 to 50000. Seen only if
Analog Input is programmed.
Range: –50000 to 50000. Seen only if
Analog Input is programmed.
Range: –5100 to 4900%. Seen only if
Analog In Diff 1-2 set to %Diff
Range: –100000 to 100000. Seen only
if Analog In Diff 1-2 is Abs Diff
6–15