GE Multilin 469 Instruction Manual page 103

CHAPTER 4: INTERFACES
4.2.3 Installing the EnerVista 469 Setup Software
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
The following minimum requirements must be met for the EnerVista 469 Setup software to
operate on your computer.
• Pentium class or higher processor (Pentium II 400 MHz or better recommended)
• Microsoft Windows 95, 98, 98SE, NT 4.0 (SP4 or higher), 2000, XP
• 128 MB of RAM (256 MB recommended)
• Minimum of 200 MB hard disk space
After ensuring these minimum requirements, use the following procedure to install the
EnerVista 469 Setup software from the enclosed GE EnerVista CD.
Insert the GE EnerVista CD into your CD-ROM drive.
Click the Install Now button and follow the installation instructions to
install the no-charge EnerVista software on the local PC.
When installation is complete, start the EnerVista Launchpad
application.
Click the IED Setup section of the Launch Pad window.
In the EnerVista Launch Pad window, click the Add Product button
and select the "469 Motor Management Relay" from the Install
Software window as shown below.
Select the "Web" option to ensure the most recent software release, or
select "CD" if you do not have a web connection.
4–13