GE Multilin 469 Instruction Manual page 258

6–8
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
Any active alarms may be viewed here.
The various alarm and alarm status actual values reflect the Alarm Name as programmed
in the first line of the message. The status is "Active" if the condition that caused the alarm
is still present.
If the 469 chassis is only partially engaged with the case, the
service alarm appears after 1 second. Secure the chassis handle to ensure that
PROPERLY
all contacts mate properly.
REACTIVE POWER
ALARM: +2000 kvar
UNDERPOWER
ALARM: 200 kW
TRIP COUNTER
ALARM: 25 Trips
STARTER FAILURE:
Trip Coil Super
CURRENT DEMAND
ALARM: 1053 A
kW DEMAND
ALARM: 505 kW
kvar DEMAND
ALARM: –2000 kvar
kVA DEMAND
ALARM: 2062 kVA
ANALOG I/P 1
ALARM: 201 Units
EMERGENCY
RESTART:
ALARM, 469 NOT
INSERTED PROPERLY
469 NOT IN SER-
VICE
RTD #1
HI
ANALOG 1-2
ALARM: 50%
ANALOG 3-4
ALARM: 50%
OVERTORQUE
ALARM:
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
Range: –50000 to +50000 kvar
Range: –50000 to +50000 kW
Range: 1 to 10000 Trips
Range: Trip Coil Super, Welded
Contactor, Breaker Failure
Range: 1 to 10000 A
Range: –50000 to +50000 kW
Range: –50000 to +50000 kvar
Range: 0 to 50000 kVA
Range: –50000 to +50000
Range: Trip Still Present, Block Still
Present, No Trips & No Blocks
Range: N/A
Range: Not Programmed, Output
Relays Forced, Analog Output
Forced, Test Switch Shorted
Range: 1 to 250°C
Range: 0 to 999 (% Diff) or 0 to 99999
(Abs Diff)
Range: 0 to 999 (% Diff) or 0 to 99999
(Abs Diff)
Range: 0.00 to 999999.9 Nm
ALARM, 469 NOT INSERTED