A1 Status - GE Multilin 469 Instruction Manual

6.2

A1 Status

6.2.1 Network Status
STATUS
STATUS
6–4
Ethernet Connection
PATH: ACTUAL VALUES
NETWORK
[ ]
This actual value appears when the relay is ordered with the Ethernet (T) option.
The
ETHERNET STATUS
connection, and diagnostic via three indicators. The
symbol indicates off. There is also a blinking indication.
The box under column indicates the Ethernet link status. If it is on, the Ethernet port is
LNK
connected to the network; if it is off, the port is disconnected. This indicator is normally on.
The box under the
CON
configured and ready to transmit and receive data. If blinking, the Ethernet port is either
active (transmitting or receiving data) or indicating an error if the diagnostic status is also
on or blinking.
The box under the
DIA
Ethernet port error has occurred or there is a duplicate IP address on the network. If
blinking, then there is a non-fatal network error. Off indicates no errors.
DeviceNet Connection
PATH: ACTUAL VALUES
NETWORK
[ ]
MESSAGE
MESSAGE
MESSAGE
MESSAGE
These values appear when the relay is ordered with the DeviceNet (D) option.
A1 STATUS NETWORK STATUS
Ethernet Lnk Con
Dia
actual value message indicates the status of the Ethernet link,
column indicates the connection status. If on, the Ethernet port is
column indicates the diagnostic status. If it is on, then either a fatal
(Refer to GEK-106491C: 469 Communications Guide)
A1 STATUS NETWORK STATUS
DEVICENET PORT:
Not powered
DEVICENET LINK:
Not online
EXPLICIT CONNEC-
TION:
POLLED I/O
CONNECTN: Nonex-
COS CONNECTION
STATUS: Nonexis-
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
Range: see description below
symbol indicates on, and the
[ ]
Range: Not powered, operational, Data
size error, Unrecoverable fault,
Minor fault
Range: Not online, Online connected,
Online disconnected, Critical
failure, Connection timeout
Range: Nonexistent, Configuring,
Established, Time-out,
Deferred Delete
Range: Nonexistent, Configuring,
Established, Time-out,
Deferred Delete
Range: Nonexistent, Configuring,
Established, Time-out,
Deferred Delete
[ ]