GE Multilin 469 Instruction Manual page 121

CHAPTER 4: INTERFACES
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
Enter the appropriate settings manually to complete the new Settings
File.
Upgrading Settings Files to a New Revision
It is often necessary to upgrade the revision code for a previously saved Settings file after
the 469 firmware has been upgraded (for example, this is required for firmware upgrades).
This is illustrated in the following procedure.
Establish communications with the 469 relay.
Select the Actual > Product Information menu item.
Record the Software Revision identifier of the relay firmware as shown
below.
Load the Settings file to be upgraded into the EnerVista 469 Setup
environment as described in Adding Settings Files to the Environment
on page 4–24.
In the File pane, select the saved Settings file.
4–31